welded structure
英 [ˈweldɪd ˈstrʌktʃə(r)]
美 [ˈweldɪd ˈstrʌktʃər]
网络 焊接结构
双语例句
- CAPM system of assembly& welding for welded structure of construction machinery
工程机械焊接结构件装焊工艺流程及数据管理系统 - Effect of Welding Angle on Fatigue Performance of Welded Structure
焊接角度对焊接结构疲劳性能的影响 - Predicting Fatigue Life of Bogie Welded Structure Based on ANSYS Secondary Development and BS Standard
基于ANSYS二次开发及BS标准的转向架焊接结构疲劳寿命预测 - Integrative Study of Fatigue Design and Welding Technology of Vehicle Welded Structure Based on Standards
基于标准的车辆焊接结构抗疲劳设计与焊接工艺一体化设计 - Renovate the Welded Structure and Welding Technique of the Hydraulic Oil Tank to Improve the Cleanliness of the Oil Tank
改进装载机液压油箱焊接结构和焊接工艺提高油箱清洁度 - It is demanding to fabricate crane bridge as large welded structure, so the upgrade to change its span is very challenging.
起重机桥架作为大型焊接结构件，制造要求高，其改制具有典型意义。 - The total fatigue life for welded structure is the sum.
二者寿命之和为焊接结构的总疲劳寿命。 - All steel welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity and stability.
全钢板焊接结构，综合处理（振动时效、热处理）消除内应力，有很好的刚性与稳定性。 - Secondly, on the basis of introducing the fatigue strength of welding joint, the main factors causing welded structure fatigue are analyzed and the methods for improving contained structure's fatigue strength are introduced.
其次，在介绍焊接接头疲劳强度的基础上，着重分析了影响焊接结构疲劳性能的主要因素，并简要介绍了提高结构疲劳强度的一些措施。 - Being quoted at the problem of welding quality in end to end joint sleeves of the motor rotor, this paper presents some measures and methods improving the welded structure and welding processing, thus improving the product quality and the working condition, and reducing the production cost.
针对电机转子并头套存在的焊接质量问题，提出了改进焊接结构与焊接工艺的措施和方法，从而提高了产品质量，改善了劳动条件，降低了生产成本。 - So, it is the new method of researching welded structure fatigue damage process.
因此，它是一种研究焊接结构疲劳损伤过程的新途径。 - Corrosion-resistance aluminum, as welded structure aluminum alloy is used in industry manufacture widely.
防锈铝合金是用于焊接铝结构件的主要材料，在焊接生产中常常遇到一些困难。 - The Relationship Between the Secondary Deformation of Welded Structure and Welding Deformation
焊接结构二次变形与焊接变形的关系 - Failure of Stainless Steel Welded Structure and Its Precaution
不锈钢焊接结构的失效与防治 - Research on Fatigue Life for Welded Structure of Mechanical Equipment
机械设备焊接结构的疲劳寿命研究 - The safety of rolling stock is highly affected by fatigue problem of welded structure of wagon body.
货车车体焊接结构的疲劳问题严重影响了车辆的安全运行，疲劳断裂一旦发生，将产生非常严重的后果。 - The quality of welded structure is fully dependent on the melting and solidifying process of weld pool after the material and structural parameters are determined. Therefore, controlling the melting state of weld pool is the key for the quality control of arc welding.
在材料和结构因素确定之后，焊接产品（或结构）的弧焊质量则完全依赖于焊接过程中熔池的熔化和凝固，因此熔池熔化状态的控制是弧焊质量控制的核心问题； - This Paper dissected the welding residual stress for three typical types of welded structure.
本文解剖了三种典型钢结构的焊接残余应力，并采用目前较为先进的方法进行了焊后处理，均达到了良好的效果。 - This article introduces foe characteristic and advantage of inner hole welded structure, and its designing, fabricating and running in a chemical fertilizer plant.
本文介绍了“内孔焊”结构的特点、优点以及该结构在我国某化肥厂装置中的设计、制造和运行。 - PFM analysis of influencing factors on fracture of welded structure with surface crack and the calculation of failure probability
含表面裂纹焊接结构断裂影响因素的PFM分析与失效概率计算 - Technology analysis on design for welded structure
焊接结构设计的工艺性分析 - Hot spot stress method used for evaluating fatigue strength of welded structure has obtained more and more application, the FEM is vital in this method.
用热点应力方法评定焊接结构的疲劳强度获得了越来越广泛的应用。在热点应力方法中，有限元分析是至关重要的。 - For the features of structural component of port cranes, and the crane's working environment and loading cases, this paper analyzes the importance of controlling welding stress in welded structure.
针对港口起重机主要部件的结构特点、工作环境和受载情况，分析控制焊接结构件焊接应力的重要性； - The cutterhead of shield machine, consisting of hundreds of welding seams, belongs to large welded structure.
盾构机刀盘属于大型焊接结构，主要焊缝数量可达上百处。 - Low alloy high strength steel has been widely used in the welded structure because of its excellent performance and remarkable economic benefits.
低合金高强度钢由于性能优异和经济效益显著，在焊接结构中得到越来越广泛的应用。 - Nowadays, aluminum alloy welded structure has been more widely used in the equipment manufacturing sector; the fatigue analysis of Aluminum alloy welded joints is one of the important basic content of welded structure fatigue design.
目前，铝合金焊接结构在整个装备制造业中被广泛应用，对铝合金焊接接头的疲劳分析已成为研究焊接结构疲劳设计的重要基础内容之一。 - Contrasted with contact reactive brazing, the growth speed of welded structure is easily controlled.
与接触反应钎焊相比，焊缝组织生长速度更易控制。 - The hull structure is a typical welded structure. The welding is a extremely process of the high temperature, the dynamic state and the instantaneous state. and also produce the welding stress and deformation.
船体结构属于一种典型的焊接结构，而焊接则是个极其复杂的高温、动态、瞬时过程，船体结构在焊接过程中不可避免地会产生焊接应力和变形。 - In this paper, the hot spot stress evaluation method is studied for evaluating the fatigue strength of welded structure.
本文研究了焊接结构疲劳强度的热点应力评估方法。